DIGITAL INSTRUMENT

APPLICATION:

This unit is microprocessor based Tacho-meter with High low speed switch. This unit measures the speed of motor in RPM. It also gives two high speeds and two low speeds limit indications with relay output. The speed limit set by the users, using membrane keypad. It also keeps record of the highest speed achieved by the motor. To remove chattering of relay +/- 3RPM HYSTRICS is provided.
It Measure the Rotational speed, linear speed and machine cycles. The relay o/p is open when the speed is below the set point and closed when the speed is above the set point.
The changes over contact relay that could be used either for alarm or control, Purposes during the monitoring process. This is more convenient and more accurate than conventional means. It is equipped with analog signal output, which could be utilized for various display indications and far more precise control. It is ideal for applications in monitoring under & over speed stop in overload conditions.

FEATURES:

  • Easily programmable from the front panel
  • Screw terminal connectors for easy installation
  • Remote Facility ( Optional)
  • High speed recording facility.

TECHNICAL SPECIFICATION:

  • Display : 4+ 4
  • Four 0 .56’’ high bright Red LED display RPM /High Speed.
  • Four 0.3’’ high bright GREN LED display Set Value & data.
  • Display Range : 10 - 4000 rpm
  • Inputs : Proximity, Encoder, Analogue :(0-10VDC, 4-20mA)
  • PPR : (3-255 Programmable)
  • Set point : 4
  • Two Nos under Speed & Two Nos over Speed, (If you want more, It also on request.)
  • Relay Outputs : 4Nos
  • Contact Rating : 230V AC-5 A or 110V DC-1A or 24V DC-7 A.
  • Alarm Conditions : Under speed / Over Speed
  • Startup Delay : 0 to 60 seconds
  • LED input status indicators,
  • Analog Output : 4 ~ 20mA OR 0-10 VDC (Programmable)
  • Power Supply : 24VDC/ 110VDC / 220VDC / 90-270VAC
  • Operating Temperature : 0 - 50 Deg C
  • Storage Temperature : -10 Degree Centigrade to +70 Degree Centigrade.
  • Housing : ABS Plastics
  • Dimension : 96 X 96 X 150 (Approx)
  • Cutout : 92mm X 92mm

4+6 Digit counter

This unit is microprocessor-based counter suitable for any winding machine. It provides modern effective means of obtaining, displaying and evaluating production information.

FEATURES:

  • Take up Speed.
  • Length Counter.
  • Total Production
  • Time Totaliser.

TECHNICAL SPECIFICATION:

  • Display: 4+6
  • The four 0.3 inches high bright green LED display is use for speed display.
  • The six 0.3 inches high bright red LED display
  • LENGTH in Mt., TOTAL Production, and Total Time (Hr. Meter) display

DISPLAY RANGE:

  • MPM: Meters Per Minutes -The Take up speed of Yarn 9999Mtrs
  • Length Counting in mtrs, Maximum - 999999
  • TP: Total Production in 1000Meter, Maximum- 99999.9Km
  • TT: Total run time of m/cs - 99999.9Hrs
  • CYCLE: Count in current cycle maximum 999999
  • Inputs : Proximity, Encoder, Analogue (0-10VDC OR 4-20mA)
  • PPR : 1-50 Programmable
  • Set point : 2 ( If you want more Pls mention)
  • Relay Outputs : 2Nos (If you want more relay o/p Pls mention)
  • Contact Rating : 5 A, 230VAC, 24VDC
  • Reset : Auto / Manually –from front key & back Side Connector
  • Analog Output : 4 ~ 20mA, 0-10 VDC (Pls mention calibration range)
  • Power Supply : 230VAC, 50Hz
  • Operating Temp : 15- 50Deg Centigrade.
  • Housing : ABS Plastics
  • Dimension : 96mm X 48mm X65mm ( Depth)

RATE INDICATOR

It is designed for operate low & high speed application, Input from proximity sensor, Magnetic pick up & Encoder

FEATURES:

  • MPM
  • CPM
  • LPM

TECHNICAL SPECIFICATION:

  • Digit : Four 0.56” High Bright Red Display
  • Display Range : auto ranging 9.999 to 9999
  • Input : Proximity Sensor, Encoder, And Potential Free contact
  • Scale : Calibration in engineering unit by user
  • Max I/p Frequency : 3 KHz.
  • Supply : 90-260VAC, 50Hz / 12-24VDC,
  • Size : 36mm X 72mm X 68mm (Depth)
  • Cut-out : 32mm X 68mm
  • Housing : ABS Plastic

SEVEN DIGIT COUNTER / HRS METER

We offer instruments for system automation. Simple, Sleek, reliable & cost effective.
It is suitable for measures length counting in mtrs, Production counter, Ltr, Kgm & Ltr.

TECHNICAL SPECIFICATION:

  • Digit : 0.3” High Bright Red Display
  • Display Range : 9999999
  • Input : Proximity Sensor, Encoder, and Potential Free Contact
  • Scale : Calibration in engineering unit by user
  • Max I/p Frequency : 3 KHz.
  • Reset : From back Panel
  • Supply : 90-260VAC, 50Hz / 12-24VDC,
  • Size (mm) : 36 X 72 X 68 (Depth)
  • Cut-out (mm) : 32 X 68
  • Housing : ABS Plastic

PORTABLE 2 in 1 DIGITAL / PHOTO CONTACT TACHOMETER.

MODEL: E-2236

FEATURES:

  • Multi function, one Instruments combine PHOT TACH.( RPM) & CONTACT TACH ( RPM, m/min.,Ft/min)
  • Wide measuring range from 5 - 100,000 RPM.
  • The last reading /Max, will be automatically stored in memory and can be obtained by pressing MEMORY CALL BUTTON.
  • • High visible, insignificant zero suppression LCD display gives exact RPM with no guessing or errors and saves battery energy.

TECHNICAL SPECIFICATION:

Display: 5 digits, 10mm (0.4’’) LCD (Liquid Crystal Display) with function annunciation.

MEASUREMENT:

Non – Contact Mode : -5 to 99,999RPM.

Contact Tach Mode : -3 to 19990

SURFACE SPEED (m/min.) : -0.5 to 1999 m/min

SURFACE SPEED (ft/min.) : -0.5 to 6560ft/min

RESOLUTION:

  • Non – Contact Mode : -0.3RPM (0.5 to 1000 rpm)
                                             -1RPM (Above 1000 rpm)
  • Contact Tach Mode : -0.2 (3-1000RPM)
                                            -1RPM (Above 1000 rpm)
  • SURFACE SPEED (m/min.) : -0.02 m/min (0.5 to 99.99m/min.)
                                                        -0.2m/min(above 100m/min)
  • SURFACE SPEED (ft/min.) : -0.1ft/min (0.2 to 999.9ft/min.)
                                                        -1ft/min (Above 1000 ft/min)
  • ACCURACY : ± (0.05% +1 digit)

SAMPLING TIME :

  • Non Contact Mode : (1 sec. over 60RPM)
  • Contact Mode : (1 sec. over 6RPM)

Non CONTACT MODE :

Detecting Distance: 50-150mm (Typical Max.300mm, depending upon ambient light)

  • Battery : 4 X 1.5V AA
  • Operating Temperature : 10-50Deg C
  • Weight : 300gcm.

ACCESSORIES :

Detecting Distance: 50-150mm (Typical Max.300mm, depending upon ambient light)

  • Carrying case - 1pc.
  • Reflecting tape marks (600mm) - 1pc.
  • RPM Adapter (CONE) - 1pc.
  • RPM adapter (Funel) - 1pc.
  • Surface Speed Test Wheel - 1pc.

DC ISOLATING AMPLIFIER:

  • I/P Signal: Frequency, Voltage, Current, Thermocouple,
  • Analogue Output: 0-10 VDC, 0-20 VDC, 4-20 mA
  • Working On : 230 VAC, 50Hz, 24 VDC
  • Rs. 232 to 485 Converter

Timer, Multi Channel Timer

FEATURES:

  • 9 mode (14 Function)
  • Mode 1: Pulse output,
  • Mode-2: Single Shot
  • Mode-3: Re-triggerable Single Shot
  • Mode-4: Cyclic Timer
  • Mode-5 : Star / Delta Timer
  • Mode-6: Forward / reverse with pause
  • Mode-7: Delay on / Delay on Break
  • Timer Multi Range: 0.9 sec to99 Hrs,
  • Pause Time: Settable in millisecond or second
  • Supply: 90 – 260 VAC, 50Hz (Universal)
  • Output: Two separate relay
  • Mounting: Din Rail

Digital Instrument,Motion Control Devices,Elavator Automotion Products

SMPS,SMPS DC Converters,Battery Charger,Stepper Motor

AC Frequency Drive,AC Motor Gearbox,Ac Tachogenerator,AC-DC Tachogenerator,Automatic Rescue Device,Battery Charger,Bldc Motor,BLDC Motor with Controller, DC Isolating Amplifier,Dc Motor,DC Tachogenerator,Digital Instrument,Door Detector,Elavator Automotion Products,Electric AC Motor,Excella Electronics, Flexible shaft coupling,Flock Printing Machine,Hybrid Stepper Motor,Incremental Encoders,Induction AC Motor,Inductive Sensor,Load Sensor,Miniture Motor, Motion Control Devices,PMDC Motor with geared Heads,PresetAble Counter,Safety Light Curtain,Serial Communication Controller,SMPS DC Converters,Speed Switch, Static Bar,Static Eliminator,Stepper Motor,Stepper Motor Controller,Touch Lop-Cop.